Monthly Archives: April 2012

IMG_0244

Grilled Burrito

This recipe started out as a how to for making fajitas, but I decided it needed one extra step, grilling the burrito.  I headed back out to Edwardsville Quality meats and picked up a couple pounds of skirt steak.  This is typically what you would find being used in Mexican restaurants.

You can grill these with some simple spices, but I decided to create an overnight marinade.  Following is a rough estimate of what I used.  I didn’t actually measure or write these down, but this can give you a good enough idea of how to make it.

1/2 Cup Soy Sauce

1/4 Cup Worcestershire

1/4 Cup Olive Oil

Juice from 1/2 lemon

2 cloves of garlic.

Combine all ingredients and put them into a gallon size freezer bag.  Add the steak, toss around and let sit overnight.  In the morning, toss the steak around again, and turn the bag over to get maximum coverage.

While the grill is firing up, take the meat and let is come up to room temperature.  Slice the onion and peppers and brush on olive oil.  This will help them to grill.

I grilled the steak over top of the fire, using a high heat.  For the vegetables, I started them on the side to roast, and moved them over the fire for the last few minutes.  I cooked the staeak to just below medium.  The peppers were cooked until they were soft, and the onions until they were translucent.

 

 

 

 

 

 

 

Make sure that you let the steak rest for about 5 minutes.  If you cut a steak open immediately after cooking, all of the juices in the steak will immediately drain and be wasted.   If you wait the extra 5 minutes, the juices will redistribute as the steak cools and you won’t lose of the great flavor.

 

 

 

 

 

 

 

Once you have all the ingredients, I took a fajita shell, and created my burrito.  I added steak, peppers, onions, cheese and some tabasco.  You can add anything you like.  Wrap the burrito tight and take it back out to the grill.  It takes about 2 minutes per side to cook the shell.  This gives it a nice crispy outside and melts the cheese inside.

This is what it looks like plated up.  I wish I would of taken a picture of the inside, but I accidently ate it all before I thought about it.  The next time I do these, I am going to get burrito shells and make a full size burrito.

If you have any questions or comments, feel free to leave them below.  You can always find us online at facebook.com/cbque or  twitter @cbque

 

 

 

IMG_2536

Lamb Ribs

LAMB RIBS 2 WAYS

1      - Smoked Lamb Ribs with Guinness Glaze

2      - Smoked Lamb Ribs With Dijon, Balsamic Glaze

**Editors Note:  This is the first article featuring a guest writer.  I hope to do many of these in the future as this will allow the readers to get different tips/techniques and points of view.  Now onto Dan’s first post of lamb ribs.

 

I first want to say thanks to Chris for asking me to write this article.  When we went to Soulard Market together, hit the butcher shop there and saw the lamb ribs beckoning to us, I think we both had a ‘TAH DAAAH’ moment.  Admittedly, I have never done lamb ribs before but I have done lamb shanks, lamb shoulder and good ol’ smoked pork ribs so I bought two racks and began planning my approach to some delicious smoked lamb ribs.

I decided to try them two ways.  First, I wanted to do something traditional.  To me nothing beats a simple fresh garlic, fresh rosemary, salt, pepper and olive oil marinade for lamb.  Secondly, I love a good Dijon mustard and balsamic glaze, so I added those ingredients to the marinade and glaze for rib rack number 2.

Then, I got thinking that what goes better with lamb than a big glass of Guinness so I decided to glaze the traditionally marinated rack in a Guinness and brown sugar glaze.

Method

I am going with the tried and true 3-2-1 method of smoking.  If you are not familiar, the basics are this:  3 hours on the smoker getting that wonderful smoke flavor, 2 hours wrapped in foil braising which adds another level of flavor and makes them tender, then 1 hour back on the grill getting good and glazed up.

The Lamb

Prep was really easy.  There is a thin skin/membrane on the back of the ribs.  This skin should be removed.  Typically with pork ribs, this can be a bit of a trick.  However, I found with the lamb ribs that I could easily slide my hand under the membrane and simply peel it off.  That is really all of the prep that I did.

INGREDIENTS

Marinade 1 (for Guinness glazed ribs)

¼ cup extra virgin olive oil

4 to 5 cloves of garlic

2 to 3 fresh sprigs of rosemary (leaves removed from stems and chopped)

Sea salt

Fresh ground pepper

Peal and chop the garlic.  Then, add some sea salt to the chopped garlic on the cutting board.  Use the back of your knife to smash the salt and garlic together into a garlic paste. (see picture).  Add the garlic to a mixing bowl and whisk together all ingredients.  Pour over one of the prepped lamb ribs and let marinade overnight (or at least 4 hours).

Marinade 2

Same ingredients and method as Marinade 1 PLUS

2 Tablespoons Dijon mustard

Approx 3 Tablespoons balsamic vinegar

I first add the Dijonto the mixing bowl, then the balsamic and whisk together.  Doing this first helps the marinade to emulsify better.  Then add the garlic and rosemary.  Next, slowly whisk in the olive oil until mixed in.  Add salt and pepper to taste.  Marinade ribs in marinade overnight or for at least 4 hours.

Guinness Glaze

1 bottle of Guinness Stout

¼ cup of packed brown sugar

1 Tablespoon ground coriander seeds

1 teaspoon fresh ground black pepper

Mix all ingredients together in a sauce pan and bring to a boil.  Lower heat and let simmer until it reduces down to about ½ cup and is like syrup.  Then, strain through a fine mesh strainer.  Set aside.

Oh man did this smell good when it was cooking.  Being a beer drinker and a home brewer, this smelled like heaven.  The Guinness mixed with the brown sugar and spices reminded me of that wonderful aroma of my stock pot boiling away right after I add the malt extract to my home brew.  Sweet malty spicy goodness.  (You beer connoisseurs know what I mean!)

Dijon and Balsamic Glaze

2 TablespoonsDijonMustard

4 Tablespoons Balsamic Vinegar

3 Tablespoons brown sugar

Salt and pepper

Whisk all ingredients together and set aside.

Onto The Smoker We Go

Step one:  Pop open a bottle of your favorite beer to keep you company while you prep the grill or smoker.

Next, I pulled the ribs out of the fridge and let them come to room temp while I prepped the smoker.  (Dijon and Balsamic marinade is on the right)

Once the coals are going, I turn off the propane and move the charcoal to the front of the grill.  I had cherry wood soaking all morning.  I added one ½ thick stick of soaked cherry to the coals to add a touch of smoke. ( I wound up adding 3 cherry sticks total.  One each hour of smoking)

I then salted and peppered the ribs and added the ribs to the grill and added the lid.

Here is a hint.  I have been smoking on the same smoker for a while now.  I have tested different amounts of charcoal, adjusting the vents and placing the meat different ways on the grill until I finally got it tuned in.

I marked on my grill where to set the vents so that I know I can get a constant 250 degrees going at all times.

I realize that this is not a purist approach.  I do not have a thermometer at grate level monitoring the temperature at the meat level.  However, I have measured the difference from what the built in thermometer reads to what a thermometer at grate level reads and it is about 10 degrees less at grate level.  So, from testing, I know I am running the temp at about 240 degrees.  Perfect for low and slow.

Don’t be afraid to experiment, and when you find what works for you, go with it!!

Now to sit back and monitor the ribs for three hours.

On To Braising

Braising Liquid

1 bottle of beer (I used Boulevard Brewing Bully Porter)

½ cup Balsamic Vinegar

½ cup water

½ onion

3 cloves of garlic

1 Tablespoon Worcestershire Sauce

1 Bay leaf

Mix all ingredients in a sauce pan.  Bring to a boil and then turn off the heat.  I bring it to a boil so that the liquid does not have to heat up on the smoker and it will already be hot when I add it to the foil pouches.

 

After three hours on the smoker the ribs are ready to be put into foil pouches and braised for 2 hours in the braising liquid.  I use one long strip of foil per rack of ribs. (I doubled up on the bottom of the pouch to prevent leaks).  I place the ribs on one side of the strip of foil, fold the foil over the ribs and seal all of the edges except the front.

I then ladle in about half of the braising liquid into each of the two pouches, seal the front edge and place the ribs back on the smoker for another two hours.

Glaze ‘Em Up

After two hours, the ribs are ready to be pulled out of the foil and glazed.  I took the ribs off of the grill and dumped the charcoal out of the holder directly onto the charcoal grate, added more coals and lit them until they were evenly heated and burning good and hot. Then I spread the coals evenly.

I brushed on the glazes, one rack with theDijonand Balsamic and the other with the Guinness Glaze.  I brushed the top of the ribs and placed them face down over the hot coals and brushed the glaze onto the back of the ribs.  Flip and repeat about 4 times.

NOTE:  This is the 1 in the 3-2-1 process, but since the ribs were finished cooking and I was only glazing them, this process really only took about 15 minutes.

And finally – the finished product!!

Dijon and Balsamic Glazed on the left,  Guinness Glazed on the right.

I love those tasty bits where the sugars in the glaze get dark and crispy (not burnt, mind you).  To me the way to go is to glaze them over really high heat and let the glaze darken and crisp up and get good and yummy!!

Lamb Ribs 2 ways with Grilled Asparagus, Onion, Tomato and Feta Salad.

If you have any questions or comments, feel free to leave them below.  You can always find us online at facebook.com/cbque or  twitter @cbque